HomeMy WebLinkAboutResolutions - 2020.09.23 - 33654MISCELLANEOUS RESOLUTION #20392 September 23, 2020
BY: Commissioner Helaine Zack, Chairperson, Finance ano mnastructure Committee
IN RE: CENTRAL SERVICES — OAKLAND COUNTY INTERNATIONAL AIRPORT — 2020 AIRPORT
PFAS TESTING GRANT ACCEPTANCE
To the Oakland County Board of Commissioners
Chairperson, Ladies and Gentlemen:
WHEREAS the Michigan Department of Transportation has awarded the Oakland County International
Airport a Grant Contract No. PTK-PFAS 2020, for Testing and Sampling of PFAS, in the amount of
$100,000, and
WHEREAS the project consists of storm -sewer monitoring and well sampling to identify if PFAS is present
in the groundwater and quantify PFAS impacts to the storm -sewer and respond to potential PFAS
contamination; and
WHEREAS the Michigan Department of Transportation, Office of Aeronautics ("AERO") shall act as agent
on behalf of the County in the administration of the Grant; and
WHEREAS the Airport Committee has reviewed the project and recommends acceptance of the Airport
PFAS Testing Grant Agreement; and
WHEREAS the target date for project completion is March 31, 2022; and
WHEREAS the total cost of the project is $100,000, with no local match required; and
WHEREAS the attached contract has completed the Grant Review Process in accordance with
Miscellaneous Resolution #19006.
NOW THEREFORE BE IT RESOLVED that the Oakland County Board of Commissioners hereby accepts
the Airport PFAS Testing Grant from the Michigan Department of Transportation ("MDOT), in an amount
not to exceed $100,000, for a period of 18 months after the execution date of the agreement by MDOT.
BE IT FURTHER RESOLVED that the acceptance of this grant does not obligate the County to any further
commitment.
BE IT FURTHER RESOLVED that the Chairperson of the Oakland County Board of Commissioners is
authorized to execute the Grant Agreement and approve changes and extensions not to exceed fifteen
percent (15%).
BE IT FURTHER RESOLVED a budget amendment is not required.
Chairperson, on behalf of the Finance and Infrastructure Committee, I move adoption of the foregoing
resolution.
Commissioner Helaine`�ack, District #18
Chairperson, Finance and Infrastructure
Committee
FINANCE AND INFRASTRUCTURE COMMITTEE VOTE:
Motion carried unanimously on a roll call vote.
GRANT REVIEW SIGN -OFF — Central Services / Aviation
GRANT NAME: 2020 Oakland County International Airport -Municipal Airport Per- and Poly- Fluoroalkyl
Substances (PFAS) Test or Sample Funding
FUNDING AGENCY: Michigan Department of Transportation
DEPARTMENT CONTACT: Cheryl Bush/Patricia Shull / (248) 666-3900
STATUS: Grant Acceptance (Greater than $10,000)
DATE: 09/08/2020
Please be advised the captioned grant materials have completed internal grant review. Below are the renu'ned comments.
The Board of Commissioners' liaison committee resolution and grant acceptance package (which should include this sign -
off and the grant agreement/contract with related documentation) may be requested to be placed on the agenda(s) of the
appropriate Board of Commissioners' committee(s) for grant acceptance by Board resolution.
DEPARTMENT REVIEW
Management and Budget:
Approved by M & B — Lynn Sonkiss (09/07/20)
Hunan Resources:
HR Approved — No HR Implications — Lori Taylor (09/08/20)
Risk Management:
Approved by Risk Management. — Robert Erlenbeck (09/08/20)
Corporation Counsel:
After review the above -referenced grant agreement, see no legal issues that must be resolved before the
Agreement is executed. - Jody Hall (09/08/20)
AIRPORT PFAS TESTING GRANT AGREEMENT
BETWEEN THE
MICHIGAN DEPARTMENT OF TRANSPORTATION
AND
COUNTY OF OAKLAND
This Grant Agreement ("Agreement') is made between the Michigan Department of Transportation, Office of
Aeronautics ("AERO"), and County of Oakland ("Grantee"),
The purpose of this Agreement is to provide funding in exchange for work to be performed for the project
named below. AERO is authorized to provide grant assistance pursuant to Public Act 154 of 2019 Legislative
appropriation of Funds for grant assistance is set forth in Public Act 154 of 2019 This Agreement is subject to
the terms and conditions specified herein.
Project Name: Airoort PFAS Testing Grant
Amount of grant: $ 100,000.00
Start Date (date executed by MDOT):
GRANTEE CONTACT:
Cheryl Bush, Manager of Aviation
Nameriille
County of Oakland
Organization
6500 Highland Rd.
Address
Waterford Twp., MI 48327
Address
(248) 285-8039
Telephone number
Fax number
bushc@oakgov.com
E-mail address
386004876
Federal ID number- (Required for Federal Funding)
13-620-0362
Grantee DUNS number- (Required for Federal Funding)
Project#: PTK-PFAS2020
% of grant state 100%
End Date (18 months after date executed):
AERO'S CONTACT:
Steve Hout_teman, Environmental Specialist
Namefritle
Office of Aeronautics
Div ilio nIB u reaulOffme
2700 Port Lansinq Road
Address
Lansing, MI 48906
Address
161(3) 299-2654
Telephone number
Fax number
houttemans(@michigan.gov
E-mail address
[Program will add a Remittance address if different than the above.]
The individuals signing below certify by their signatures that they are authorized to sign this Agreement on
behalf of their agencies and that the parties will fulfill the terms of this Agreement, including any attached
appendices, as set forth herein.
FOR THE GRANTEE:
Signature
Name/Title Date
FOR THE OFFICE OF AERONAUTICS:
Signature
Name/Title Date
PROJECT SCOPE
This Agreement and its appendices constitute the entire Agreement between AERO and the Grantee
and may be modified only by written agreement between AERO and the Grantee.
(A) The scope of this project is limited to the activities specified in Appendix A and such activities as
are authorized by AERO under this Agreement — including the approved attached work plan. Any
change in project scope requires prior written approval in accordance with Section Ill, Changes, in
this Agreement.
(B) By acceptance of this Agreement, the Grantee commits to complete the project identified in
Appendix A within the time period allowed for in this Agreement and in accordance with the terms
and conditions of this Agreement.
11. AGREEMENT PERIOD
Upon signature by AERO, the Agreement shall be effective from the Start Date until the End Date on
page 1. AERO shall have no responsibility to provide funding to the Grantee for project work
performed except between the Start Date and the End Date specified on page 1. Expenditures
made by the Grantee prior to the Start Date or after the End Date of this Agreement are not eligible
for payment under this Agreement.
CHANGES
Any changes to this Agreement shall be requested by the Grantee or AERO in writing and
implemented only upon approval in writing by AERO. AERO reserves the right to deny requests
for changes to the Agreement or to the appendices. No changes can be implemented without
approval by AERO.
IV. GRANTEE DELIVERABLES AND REPORTING REQUIREMENTS
The Grantee shall submit deliverables and follow reporting requirements specified in Appendix A of
this Agreement.
(A) The Grantee must complete and submit [quarterly] [financial and/or progress] reports according
to a form and format prescribed by AERO [and must include supporting documentation of eligible
project expenses]. These reports shall be due according to the following.
F Reporting Period
Due Date
January 1 — March 31
April 30
April 1 — June 30
July 31
July 1 —September 30
Before October 15"
October 1 — December 31
January 31
*Due to AERO's year-end closing procedures, there will be an accelerated due date for the report
covering July 1 — September 30. Advance notification regarding the due date for the quarter ending
September 30 will be sent to the Grantee. If the Grantee is unable to submit a report in early
October for the quarter ending September 30, an estimate of expenditures through September 30
must be submitted to allow AERO to complete its accounting for that fiscal year.
The forms provided by AERO shall be submitted to AERO's contact at the address on page 1. [All
required supporting documentation (invoices, proof of payment, etc.) for expenses must be included
with the report.]
(B) The Grantee shall provide a final project report in a format prescribed by AERO. The Grantee
must provide a draft final report 45 days prior to the end date of the agreement. The Grantee shall
submit the final status report, including all supporting documentation for expenses, along with the
final project report and any other outstanding products within 30 days from the End Date of the
Agreement.
(C) The Grantee must provide electronic copies of all products and deliverables in accordance with
Appendix A.
(D) All products shall acknowledge that the project was supported in whole or in part by [Airport
PFAS Testing Program], EGLE and MDOT, per the guidelines provided by the program Request for
Proposals
V. GRANTEE RESPONSIBILITIES
(A) The Grantee agrees to abide by all applicable local, state, and federal laws, rules, ordinances,
and regulations in the performance of this grant.
(B) All local, state, and federal permits, if required, are the responsibility of the Grantee. Award of
this grant is not a guarantee of permit approval by AERO.
(C) The Grantee shall be solely responsible to pay all applicable taxes and fees, if any, that arise
from the Grantee's receipt or execution of this grant.
(D) The Grantee is responsible for the professional quality, technical accuracy, timely completion,
and coordination of all designs, drawings, specifications, reports, and other services submitted to
AERO under this Agreement, The Grantee shall, without additional compensation, correct or
revise any errors, omissions, or other deficiencies in drawings, designs, specifications, reports, or
other services.
(E) AERO's approval of drawings, designs, specifications, reports, and incidental work or materials
furnished hereunder shall not in any way relieve the Grantee of responsibility for the technical
adequacy of the work. AERO's review, approval, acceptance, or payment for any of the services
shall not be construed as a waiver of any rights under this Agreement or of any cause of action
arising out of the performance of this Agreement.
(F) The Grantee acknowledges that it is a crime to knowingly and willingly file false information with
AERO for the purpose of obtaining this Agreement or any payment under the Agreement, and that
any such filing may subject the Grantee, its agents, and/or employees to criminal and civil
prosecution and/or termination of the grant.
VI. USE OF MATERIAL
Unless otherwise specified in this Agreement, the Grantee shall release information or material
developed under this Agreement, provided it is acknowledged that AERO funded all or a portion of
its development.
AERO, and federal awarding agency, if applicable, retains a royalty -free, nonexclusive and
irrevocable right to reproduce, publish, and use in whole or in part, and authorize others to do so, any
copyrightable material or research data submitted under this grant whether or not the material is
copyrighted by the Grantee or another person. The Grantee will only submit materials that AERO
can use in accordance with this paragraph.
VII. ASSIGNABILITY
The Grantee shall not assign this Agreement or assign or delegate any of its duties or obligations
under this Agreement to any other party without the prior written consent of AERO. AERO does not
assume responsibility regarding the contractual relationships between the Grantee and any
subcontractor.
VIII. SUBCONTRACTS
AERO reserves the right to deny the use of any consultant, contractor, associate, or other personnel
to perform any portion of the project. The Grantee is solely responsible for all contractual activities
performed under this Agreement. Further, AERO will consider the Grantee to be the sole point of
contact with regard to contractual matters, including payment of any and all charges resulting from
the anticipated Grant. All subcontractors used by the Grantee in performing the project shall be
subject to the provisions of this Agreement and shall be qualified to perform the duties required.
IX. NON-DISCRIMINATION
The Grantee shall comply with the Elliott Larsen Civil Rights Act, 1976 PA 453, as amended,
MCL 37.2101 at seq., the Persons with Disabilities Civil Rights Act, 1976 PA 220, as amended,
MCL 37.1101 et seq., and all other federal, stale, and local fair employment practices and equal
opportunity laws and covenants that it shall not discriminate against any employee or applicant for
employment, to be employed in the performance of this Agreement, with respect to his or her hire,
tenure, terms, conditions, or privileges of employment, or any matter directly or indirectly related to
employment, because of his or her race, religion, color, national origin, age, sex, height, weight,
marital status, or physical or mental disability that is unrelated to the individual's ability to perform
the duties of a particular job or position. The Grantee agrees to include in every subcontract
entered into for the performance of this Agreement this covenant not to discriminate in
employment. A breach of this covenant is a material breach of this Agreement.
X. UNFAIR LABOR PRACTICES
The Grantee shall comply with the Employers Engaging in Unfair Labor Practices Act, 1980 PA
278, as amended, MCL 423.321 at seq.
XI. LIABILITY
(A) Each party to this Contract will remain responsible for any claims arising out of that party's
performance of this Contract as provided by this Contract or by law. The Grantee, not the State of
Michigan, is responsible for all liabilities as a result of claims, judgments, or costs arising out of
activities to be carried out by the Grantee under this Agreement, if the liability is caused by the
Grantee, or any employee or agent of the Grantee acting within the scope of their employment or
agency.
(B) Nothing in this Agreement should be construed as a waiver of any governmental immunity by the
Grantee, the State of Michigan, its agencies, or their employees as provided by statute or court
decisions.
XII. CONFLICT OF INTEREST
No government employee, or member of the legislative, judicial, or executive branches, or member of
the Grantee's Board of Directors, its employees, partner agencies, or their families shall benefit
financially from any part of this Agreement.
XIII. ANTI -LOBBYING
Id
If all or a portion of this Agreement is funded with federal funds, then in accordance with 2 CFR
200, as appropriate, the Grantee shall comply with the Anti -Lobbying Act, which prohibits the use
of all project funds regardless of source, to engage in lobbying the State of Michigan or federal
government or in litigation against the State of Michigan. Further, the Grantee shall require that
the language of this assurance be included in the award documents of all subawards at all tiers.
If all or a portion of this Agreement is funded with state funds, then the Grantee shall not use any of
the grant funds awarded in this Agreement for the purpose of lobbying as defined in the State of
Michigan's lobbying statute, MCL 4.415(2). "'Lobbying' means communicating directly with an
official of the executive branch of state government or an official in the legislative branch of state
government for the purpose of influencing legislative or administrative action." The Grantee shall
not use any of the grant funds awarded in this Agreement for the purpose of litigation against the
State of Michigan. Further, the Grantee shall require that language of this assurance be included
in the award documents of all subawards at all tiers.
XIV. DEBARMENT AND SUSPENSION
By signing this Agreement, the Grantee certifies that it has checked the federal
debarment/suspension list at www.SAM.aov to verify that its agents, and its subcontractors:
(1) Are not presently debarred, suspended, proposed for debarment, declared ineligible, or
voluntarily excluded from covered transactions by any federal department or the State of
Michigan.
(2) Have not within a three-year period preceding this Agreement been convicted of or had a
civil judgment rendered against them for commission of fraud or a criminal offense in
connection with obtaining, attempting to obtain, or performing a public (federal, state, or
local) transaction or contract under a public transaction, as defined in 45 CFR 1185;
violation of federal or state antitrust statutes or commission of embezzlement, theft, forgery,
bribery, falsification or destruction of records, making false statements, or receiving stolen
property.
(3) Are not presently indicted or otherwise criminally or civilly charged by a government entity
(federal, state, or local) with commission of any of the offenses enumerated in subsection (2)
(4) Have not within a three-year period preceding this Agreement had one or more public
transactions (federal, state, or local) terminated for cause or default.
(5) Will comply with all applicable requirements of all other state or federal laws, executive
orders, regulations, and policies governing this program.
XV. AUDIT AND ACCESS TO RECORDS
AERO reserves the right to conduct a programmatic and financial audit of the project, and AERO
may withhold payment until the audit is satisfactorily completed. The Grantee will be required to
maintain all pertinent records and evidence pertaining to this Agreement, including grant and any
required matching funds, in accordance with generally accepted accounting principles and other
procedures specified by AERO. AERO or any of its duly authorized representatives must have
access, upon reasonable notice, to such books, records, documents, and other evidence for the
purpose of inspection, audit, and copying. The Grantee will provide proper facilities for such access
and inspection. All records must be maintained for a minimum of [five] years after the final payment
has been issued to the Grantee by AERO.
XVI. INSURANCE
(A) The Grantee must maintain insurance or self-insurance that will protect it from claims that may
arise from the Grantee's actions under this Agreement.
(B) The Grantee must comply with applicable workers' compensation laws while engaging in
activities authorized under this Agreement.
XVII. OTHER SOURCES OF FUNDING
The Grantee guarantees that any claims for reimbursement made to AERO under this Agreement
must not be financed by any source other than AERO under the terms of this Agreement. If
funding is received through any other source, the Grantee agrees to delete from Grantee's billings,
or to immediately refund to AERO, the total amount representing such duplication of funding.
XVIII. COMPENSATION
(A) A breakdown of costs allowed under this Agreement is identified in Appendix A. AERO will pay
the Grantee a total amount not to exceed the amount on page 1 of this Agreement, in accordance
with Appendix A, and only for expenses incurred [and paid]. All other costs necessary to complete
the project are the sole responsibility of the Grantee.
(B) Expenses incurred by the Grantee prior to the Start Date or after the End Date of this Agreement
are not allowed under the Agreement, [unless otherwise specified in Appendix Al.
(C) AERO will approve payment requests after approval of reports and related documentation as
required under this Agreement.
(D) AERO reserves the right to request additional information necessary to substantiate payment
requests.
(E) Payments under this Agreement should be processed using MDOT's Electronic Invoicing (E -
invoicing) system . The Grantee shall process invoices/payments/reimbursements consistent with
other project payments through MDOT's ProjectWise system. .
(F) An amount equal to 10 percent of the grant award] will be withheld by AERO until the project is
completed in accordance with Section XIX, Closeout, and Appendix A.
XIX. CLOSEOUT
(A) A determination of project completion, which may include a site inspection and an audit, shall be
made by AERO after the Grantee has satisfactorily completed the activities, and provided products
and deliverables described in Appendix A.
(B) Upon issuance of final payment from AERO, the Grantee releases AERO of all claims against
AERO arising under this Agreement. Unless otherwise provided in this Agreement or by State law,
final payment under this Agreement shall not constitute a waiver of AERO's claims against the
Grantee.
(C) The Grantee shall immediately refund to AERO any payments in excess of the costs allowed by
this Agreement.
XX. CANCELLATION
This Agreement may be canceled by AERO, upon 30 days written notice, due to Executive Order,
budgetary reduction, other lack of funding, upon request by the Grantee, or upon mutual
agreement by AERO and Grantee. AERO may honor requests for just and equitable
compensation to the Grantee for all satisfactory and eligible work completed under this Agreement
up until 30 days after written notice, upon which time all outstanding reports and documents are
due to AERO and AERO will no longer be liable to pay the grantee for any further charges to the
grant.
XXI. TERMINATION
(A) This Agreement may be terminated by AERO as follows.
(1) Upon 30 days written notice to the Grantee:
a. If the Grantee fails to comply with the terms and conditions of the Agreement, or with the
requirements of the authorizing legislation cited on page 1, or the rules promulgated
thereunder, or other applicable law or rules.
b. If the Grantee knowingly and willingly presents false information to AERO for the
purpose of obtaining this Agreement or any payment under this Agreement.
c. If AERO finds that the Grantee, or any of the Grantee's agents or representatives,
offered or gave gratuities, favors, or gifts of monetary value to any official, employee, or
agent of AERO in an attempt to secure a subcontract or favorable treatment in awarding,
amending, or making any determinations related to the performance of this Agreement.
d. If the Grantee or any subcontractor, manufacturer, or supplier of the Grantee appears in
the register of persons engaging in unfair labor practices that is compiled by the
Michigan Department of Licensing and Regulatory Affairs or its successor.
e. During the 30 -day written notice period, AERO shall withhold payment for any findings
under subparagraphs a through d, above and the Grantee will immediately cease
charging to the grant and stop earning match for the project (if applicable).
(2) Immediately and without further liability to AERO if the Grantee, or any agent of the
Grantee, or any agent of any subcontract is:
a. Convicted of a criminal offense incident to the application for or performance of a State,
public, or private contract or subcontract;
b. Convicted of a criminal offense, including but not limited to any of the following:
embezzlement, theft, forgery, bribery, falsification or destruction of records, receiving
stolen property, or attempting to influence a public employee to breach the ethical
conduct standards for State of Michigan employees;
c. Convicted under State or federal antitrust statutes; or
d. Convicted of any other criminal offense that, in the sole discretion of AERO, reflects on
the Grantee's business integrity.
e. Added to the federal or state Suspension and Debarment list.
(B) If a grant is terminated, AERO reserves the right to require the Grantee to repay all or a portion
of funds received under this Agreement.
XXIL IRAN SANCTIONS ACT
By signing this Agreement the Grantee is certifying that it is not an Iran linked business, and that its
contractors are not Iran linked businesses, as defined in MCL 129.312.
PROJECT -SPECIFIC REQUIREMENTS —APPENDIX A
XXIII. Sampling Protocols: Grantees must adhere to EGLE PFAS sampling guidance
documents.
XXIV. Sharing Results of Phase Investigations. Grantees whose work plans include phased l
investigations agree to share and discuss their results with MDOT and EGLE and obtain
agreement from EGLE on their Phase 2 plans.
n
dux NP'P'pe�
PFAS ASSESSMENT GRANT PROPOSAL
OAKLAND COUNTY INTERNATIONAL AIRPORT
MPART GRANT PROGRAM
Submitted to:
Michigan Department of Transportation Aeronautics
2700 Port Lansing Road
Lansing, MI 48906
Prepared for:
Oakland County International Airport
Oakland County Office of Corporate Council
1200 North Telegraph Road
Dept. 419
Pontiac, MI 48341
Prepared by:
ASTI Environmental
10448 Citation, Suite 100
Brighton, Michigan 48116
810.225.2800
Hay 26, 2020
Remised: August 20, 2020
ASTI Project No. 11259
TABLE OF CONTENTS
Section Pape
Title Page I
Table of Contents ii
1.0 Project Description 1
2.0 Work Plan 2
2.1 Site History 2
2.2 Task 1 Groundwater investigation 3
2.2.1 Well Installation 3
2.2.2 Well Development 4
2.2.3 Well Surveying 4
2.3 Task 2 Groundwater Sampling 4
2.3.1 Water Level Measurement 5
2.3.2 Low Flow Purging Method 5
2.3.3 Sample Collection 6
2.3.4 Sample Shipping 6
2.3.5 Sample Analysis 6
2.4 Task 3 Short -Term Storm Water Characterization Study 7
2.4.1 Sample Collection 7
2.4.2 Sample Identification and Labeling 7
2.4.3 Sample Shipping g
2.4.4 Sample Analysis 6
3.0 Quality Assurance / Quality Control 9
4.0 Reports 10
4.1 Quarterly Reports 10
4.2 Groundwater Investigation Report 10
4.3 Short -Term Storm Water Characterization Study 10
5.0 Funding Request 11
Figure
1 Map of AFFF Incident Locations
Table
1 AFFF Incidents Summary (1996 — May 2020)
Appendices
A AFFF Fluid Material Safety Data Sheets
ASTI Project No. 11259 ii
1.0 PROJECT DESCRIPTION
The Oakland County International Airport (OCIA) has completed this grant application to
request funding assistance from the Michigan Department of Environment Great Lakes and
Energy (EGLE) and the Michigan Department of Transportation (MDOT) under the Michigan
PFAS Action Response Team (MPART) grant under Section 401 (1) and (2) of EGLE's fiscal
year (FY) 2020 budget. This funding assistance is being requested for storm -sewer
monitoring and well sampling with the goal of identifying if PFAS is present in the groundwater
and quantifying PFAS impacts to the storm -sewer. The objective is to identify and respond
appropriately to potential PFAS contamination. Identification of PFAS is critical to OCIA for
the following reasons:
• The OCIA is located within less than 0.25 -mile of two large lakes along with several
streams and or rivers. The lakes include Williams Lake to the north and Pontiac Lake
to the west.
• Numerous wells exist within a one -mile radius of the property. In addition, portions of
the OCIA property are within four different wellhead protection areas (WHPAs). Of
these, two are Type 1 traditional WHPAs, one is a Type 1 Provisional WHPA, and the
one is a Type 2 Provisional WHPA.
• Between 1996 and 2019, seven incidents involving the use of AFFF have occurred on
the OCIA property.
• On August 21, 2019 OCIA received a "Compliance Communication Regarding the Use
of Per- and Poly-fluoroalkyl Substances (PFAS) at Oakland County International,
Waterford, Michigan'. In October 2019 OCIA submitted a Draft Workplan to EGLE to
address these concerns raised in the August 2019 letter. On October 18, 2019, the
OCIA received a letter from EGLE dated October 14, 2019 regarding the "National
Pollutant Discharge Elimination System (NPDES) Storm Water General Permit No.:
110228". In November 2019, OCTA submitted a Short Term Storm Water
Characterization Study (STSWCS). OCIA continues to work with EGLE on both of
these issues.
• On March 3, 2020 during nozzle certification testing utilizing a 'crash foam cart',
approximately 40 to 50 gallons of diluted Chemguard AFFF liquid was released to a
storm sewer.
The OCIA has never used AFFF for training purposes.
ASTI Project No. 11259
2.0 WORK PLAN
2.1 Site History
Oakland County International Airport (OCTA) began in November 1928 with the purchase of
approximately 160 -acres by the City of Pontiac. On February 11, 1930 the airport became
the first in the nation to win an A -1-A rating from the U.S. Department of Commerce. Located
essentially in the middle of the county, the airport has always served Oakland County as a
whole. Oakland County acquired the airport from the City of Pontiac in 1967 in exchange for
the Old Masonic Temple building in downtown Pontiac. Over the years the airport has grown
into a thriving complex that is nationally recognized for the safe, effective and efficient aviation
services it provides.
In 2017 Oakland County International Airport ranked as the 99th busiest airport in the nation
with 131,294 annual take -offs and landings. Full time U.S. Customs service became available
beginning January 2, 1996. The number of international flights has more than tripled since
full-time customs service began at the airport with an average of 180 international flights per
month in 2000.
Oakland County International Airport provides a 24-hour on site Aircraft Rescue and Fire
Fighting (ARFF) department. In 1965,, the department received it's first ARFF foam truck
which was equipped with 400 gallons of 3MLightwater3%Aircraft Fire Fighting Foam (AFFF).
In 1991, the department received a new Oshkosh T-1500 (R2) ARRF vehicle equipped with
200 -gallons of 3M Lightwater 3%. Between approximately 2010 and 2013, the AFFF was
refilled as needed with Buckeye 3% AFFF. In 2014, the AFFF was replaced with Chemguard
3% AFFF. In 2005, the department added a second ARRF vehicle (an Oshkosh TI -1500(R-
1)) with 200 -gallon AFFF capacity equipped with Aosulite 3% AFFF. Between 2010 and 2013
this truck was also refilled with Buckeye 3% AFFF as needed. Since 2014, the truck has been
refilled with Chemguard 3% AFFF as needed. Refer to Attachment A for the Material Safety
Data Sheets for the AFFF products utilized at OCTA.
Between 1965 and 1996, an unknown quantity of AFFF was utilized on the Subject Property
as records from this period were lost. Between 1996 and 2019, AFFF was known to have
been used in seven incidents on OCTA property. On March 3, 2020 during nozzle certification
testing utilizing a'crash foam cart', approximately 40 to 50 gallons of diluted to 3% Chemguard
ASTI Project No. 11259 2
AFFF liquid was released to a storm sewer in the nozzle testing area. Results of a storm
water system sample collected the next day identified PFAS compounds exceeding 9,000
ng/L in the storm water from a nearby catch basin. The OCIA has never used AFFF for training
purposes.
2.2 Task 1 Groundwater Investigation,
Between 1996 and 2019, seven incidents involving the use of AFFF have occurred on the
OCTA property. These incidents are summarized on Table 1 including the estimated volume
of AFFF liquid utilized. The approximate locations of these incidents are shown on Figure 1.
To investigate the potential for the uses of AFFF to have impacted the OCIA property, the
following general scope of work is being proposed. OCIA is proposing the installation of one
(1) groundwater monitoring well at each onsite (within the airport boundary) location. In
addition, one monitoring well will also be installed at the location of the testing cart release to
determine in AFFF has impacted the subsurface with PFAS.
2.2.1 Well Installation
The monitoring wells will be installed using a hollow -stem auger drilling rig. All of the wells
will be:
• Constructed using 2 -inch inside diameter, Schedule 40 PVC riser.
• The well screens will be five (5) feet long #10 slot unless a different slot size is required
by the lithology.
• The bottom of the well screen will be installed approximately four (4) feet below the
groundwater surface such that the water table intersects the well screen. It is
anticipated that the groundwater levels on the property are currently high.
• Well sand pack will be installed from at least one (1) foot below the bottom of the well
screen to at least two (2) feet above the well screen.
• The remainder of the borehole annulus will be filled with hydrated bentonite chips.
• The wells will be provided with a locking well plug and padlock.
• The onsite monitoring wells will be completed with flush mount protective casing. All
onsite monitoring well casings will be aircraft rated.
• The protective casings will be installed in a minimum 18 -inch square concrete well
pad.
ASTI Project No. 11259 3
Wells will be labeled in the field to allow for positive identification.
• The top of the well casing will be marked in a permanent manner on the northern side
to provide a repeatable location from which to collect water levels.
During the installation of the monitoring wells, the soils will be observed by split spoon
samplers, inspected and described in the field by an experienced field geologist. Soil samples
will not be collected as a part of this sampling effort.
2.2.2 Well Development
Following installation and prior to conducting any sampling, the monitoring wells will be
developed to improve the hydraulic connection with the formation and remove particles
mobilized by the soil boring process. Development of wells will be done by surging with a
surge block to create alternating inward and outward movement of water through the well
screen and filter pack. Aquifer materials that accumulate in the well are removed by over
pumping (pumping at rates higher than used during sampling). Development of the well will
continue until the purged water is visually clear following surging. The purged water will be
containerized for off-site disposal.
2.2.3 Well Survevinq
Following installation of the monitoring wells, each well will be surveyed both horizontally and
vertically to allow for the determination of groundwater flow direction and elevation.
Monitoring locations will be surveyed horizontally to within ±0.1 feet and vertically to within
±0.01. At each monitoring well location, two vertical readings will be collected, one from the
approximate ground surface (this reading may be ±0.1 feet) and one from the top of the well
casing. The top of the well casing elevation will be collected from the portion of the casing
marked during well installation. Survey coordinates will be collected in the WGS 1984
coordinate system.
2.3 Task 2 Groundwater Samnlinq
Groundwater sampling of each monitoring well and analysis will be conducted consistent with
EGLE and United States Environmental Protection Agency (US EPA) PFAS Sampling
Guidance. EGLE guidance documents include the following:
ASTI Project No, 11259 4
• EGLE General PFAS Sampling Guidance, October 2018
• EGLE Groundwater PFAS Sampling Guidance dated October 2018
Following purging of the wells, the wells should be allowed to equilibrate with the aquifer for a
minimum of 24 -hours before sampling. This equilibration period is critical to obtaining samples
that are representative of the conditions in the aquifer.
2.3.1 Water Level Measurement
Static water level (SWL) readings will be obtained for all wells prior to purging to the nearest
hundredth of a foot. A clean electric water level indicator will be used to determine the SWL.
2.3.2 Low Flow Purqina Method
Once groundwater elevations have been collected from all wells, each well will be sampled
utilizing low -flow sampling protocols. To assure formation water is being pumped, the pump
intake or inlet tubing shall be set within the lower half of the screen interval, and the pumping
rate shall be adjusted so that the static water level readings eventually stabilize. This assures
groundwater is recharging the well at an equivalent rate to pumping. Flow rate and static
water level readings shall be recorded on a field data sheet.
While purging, the following water indicator quality parameters will be monitored:
• dissolved oxygen;
• temperature;
• specific conductivity;
• pH,
• RED/OX potential; and
Turbidity.
At the point when these parameters are observed to stabilize, formation water is being
obtained, and sampling may proceed.
ASTI Project No. 11259 5
In locations where the formation transmissivity limits the recharge rate to the well, fixed -
volume purging will be used. In low -recovery wells, all of the water within the well casing will
be pumped out. Sampling will be conducted within 24 hours following purging the well dry.
2.3.3 Samole Collection
The samples will be collected directly from the pump discharge into laboratory provided pre -
cleaned containers. Prior to handling the sample bottles, the sampler will don a clean pair of
powder free nitrile gloves. In addition, the sampler must take extreme care to insure that they
are not a source of cross contamination from clothing or personal care items.
Each sample will be collected into two (2) unproserved 250 milliliter capacity high density
poly -ethylene (HDPE) wide-mouth bottles. Once the sample has been collected, it should be
placed into a cooler provided with water ice. Care MUST be taken to ensure that melting ice
does not contaminate the sample. The cooler and ice should be used to cool the sample to
approximately 6°C.
2.3.4 Samnle Shiooina
Following sample collection, the cooler used to cool the samples will serve as a shipping
container and will be provided by the laboratory along with the appropriate sample containers.
Prior to shipment of the samples to the laboratory, a chain of custody (COC) form will be
completed by the field sample custodian. The COC will be signed by the field personnel
relinquishing the samples to the courier and will be signed by the laboratory upon receipt of
the cooler. The cooler will be taped shut and signed across the lid of the cooler, and the
laboratory personnel will confirm the signature is intact upon receipt.
2.3.5 Samole Analvsis
The samples will be shipped under standard COC protocols to Eurofins/Test America for
analysis for the compounds found on the EGLE Minimum PFAS Analyte list. Samples will be
analyzed by U.S,EPA method 537 MOD,
ASTI Project No. 11259 6
2.4 Task 3 Short -Term Storm Water Characterization Study,
To address the EGLE concerns regarding discharge of PFAS to the storm sewer system from
the OCIA, a Short -Term Storm Water Characterization Study (STSWCS) will be completed.
The STSWCS, will generally consist of the collection of PFAS samples from two locations
within the storm sewer system on the OCTA. One location will be from the effluent from the
oil/water separator through which all storm effluent from the OCIA property discharges. The
second sampling location will be from a storm -sewer manhole located just down the system
gradient from the March 2020 testing cart release.
Samples for the STSWCS will be collected on two dry weather days and two wet weather
days. Currently, it is anticipated that sampling will be completed no later than the first quarter
of 2021. However, the exact timing of the sampling events is currently unknown as the wet
weather events must occur during the first 30 -minutes of a significant storm event. A
significant storm event is defined as an event causing greater than 0.1 inch of rainfall with a
storm system discharge, that occurs at least 72 -hours after the previous significant storm
event. Prior to implementing the STSWCS the OCTA will work with EGLE personnel to obtain
an approved STSWCS Plan. During the approval of the STSWCS, modifications to this plan
may be required.
2.4.1 Samole Collection
The samples will be collected directly from the storm sewer locations with a peristaltic pump
and dedicated silicone tubing or a dedicated high density polyethylene (HDPE) bailer. The
samples will be collected directly into two laboratory provided pre -cleaned unpreserved 250
milliliter capacity HDPE wide-mouth bottles. Once the sample has been collected, it will be
placed into a cooler provided with water ice.
2.4.2 Samole Identification and Labelinq
All samples will be labeled to prevent mis-identification. Sample labels will be affixed to the
sample containers prior to sampling. Sample labels will contain the following information:
• Sample number;
• Initials of sampler;
• Date and time of collection;
ASTI Project No. 11259 7
• Place of collection; and
• Analysis to be performed on the sample.
2.4.3 Samole Shiooina
Following sample collection, the cooler used to cool the samples will serve as a shipping
container and will be provided by the laboratory along with the appropriate sample containers.
Prior to shipment of the samples to the laboratory, a chain of custody (COC) form will be
completed by the field sample custodian. The COC will be signed by the field personnel
relinquishing the samples to the courier and will be signed by the laboratory upon receipt of
the cooler. The cooler will be taped shut and signed across the lid of the cooler, and the
laboratory personnel will confirm the signature is intact upon receipt.
2.4.4 Sample Analvsis
The samples will be shipped under standard COC protocols to Eurofins/Test America for
analysis for the compounds found on the EGLE Minimum PFAS Analyte list. Samples will be
analyzed by U.S.EPA method 537 MOD.
ASTI Project No. 11259 a
3.0 QUALITY ASSURANCE/ QUALITY CONTROL
To assure the usability of the samples collected during these investigations, samples will be
analyzed by Eurofins/Test America for the compounds found on the EGLE Minimum PFAS
Analyte list. Samples will be analyzed by U.S.EPA method 537 MOD. In addition, a number
of quality assurance and quality control measures are incorporated into these studies,
including both field and laboratory stages, as described below.
Field QA/QC samples will be collected and analyzed along with the investigative samples to
determine the potential bias and variability introduced in sample collection, storage, handling
and shipping. During the sampling events, four types of field QA/QC samples may be
collected: equipment blanks, trip blanks, field blanks and field duplicates. Sampling will be
conducted consistent with EGLE and United States Environmental Protection Agency (US
EPA) PEAS Sampling Guidance. EGLE guidance documents include the following:
• EGLE General PFAS Sampling Guidance, October 2018
• EGLE Groundwater PEAS Sampling Guidance dated October 2018
Laboratory QA/QC procedures will be employed to document the quality of the data
resulting from the analytical program. Laboratory procedures will include method blanks,
matrix spikes (MS), laboratory replicate samples, laboratory control samples (LCS), isotope
dilution analytes (IDA), and continuing calibration verification (CCV) to verify and document
the precision and accuracy of the results of analysis.
Eurofins/Test America was selected as the laboratory based on having the nation's largest
LCMSMS capacity dedicated to PFAS testing, with over 35 PEAS related compounds at
detection limits well below state and federal screening levels. Their laboratories support
methods 537.1, ISO25101, 537M and PFAS by QSM Table B15, with all the necessary
validation data to support the precision and accuracy of our methodology. In addition,
Eurofins/Test America has successfully implemented an application of Method 537 with
isotope dilution for use on more complex matrices, such as groundwater, soil, tissue, and
sediment, and has incorporated replacement compounds such as GenX, DONA and F -53B
into this analysis.
ASTI Project No. 11259 9
4.0 REPORTS
As part of the grant, OCIA anticipates that the following reports will be generated.
4.1 Quarteriv Reports
If approved, each calendar quarter during the life of the grant, OCIA or it's contractor will
prepare a quarterly report. The quarterly reports will include discussions of current and
previous spending, tasks completed, tasks planned for the following quarter, and any
difficulties and their resolutions encountered during the quarter. All quarterly report will be
completed following MDOT guidance and will be submitted within 30 -days of the end of the
quarter.
4.2 Groundwater Investiaation Report
The report will include an outline of the work completed during the investigation, a discussion
of the items identified during the investigation, the results of the investigation, and appended
copies of all supporting materials.
The groundwater laboratory analytical results will be compared to the Michigan maximum
contaminant levels (MCLs) for groundwater protective of drinking water criteria. The report
will include a potentiometric surface map based on the groundwater elevation data collected
from the groundwater monitoring wells.
4.3 Short -Term Storm Water Characterization Studv
Following completion of the final storm sewer samples, a STSWCS report will be prepared.
The report will include an outline of the work completed during the investigation, a discussion
of the items identified during the investigation, the results of the investigation, and appended
copies of all supporting materials.
ASTI Project No. 11259 10
5.0 FUNDING REQUEST
Based on the investigations described above, OCIA anticipates that the following funding
will be required to complete the proposed sampling
Groundwater Sampling Investigation and Report $ 85,000
STSWCS $ 15,000
OCIA Grant Administration and Reporting $ In Kind
Therefore, the OCTA is seeking grant funding of approximately $100,000
ASTI Project No, 11259 11
Figure
1 Map of AFFF Incident Locations
ASTI Project No. 11259
IA
Table
1 AFFF Incidents Summary (1996 — May 2020)
ASTI Project No. 11259
TABLE 1
OAKLAND COUNTY INTERNATIONAL AIRPORT
AFFF INCIDENT SUMMARY
AFFF Fluid
Incident
AIRCRAFT TYPE
POSSIBLE CAUSE
Used
COMMENTS
Number
DATE
Pilot hit brakes too hard and flipped on
>5 gals
Runway 9L
1
1/15/1996
1949 Luscobe
landing
180 degree tum at sharp angle, close to
3 gals
on airport (near Williams Lake Road)
2
1127/2006
Betlanca Citabria
ground
3
12/4/2009
Gulfstream G-4
Engine fire
>10 als
9
Pentastar ramp
3/15/2011
Seneca II
Hanger contents on fire
9
Unknown
Avantgard Aviation
4
Hot, humid day, possibly overloaded
45 gals
on airport (near Avantgarde)
5
6/21/2013
Cessna 172 Skyhawk
with passengers & fuel
6
10/27/2018
Convair
Left engine on fire
9
33 gals
IFL
Dumpsterfire
2.25 gals
Corporate Eagle - new facility
7
6/9/2019
N/A
During nozzle certification tesing, a leak on the new testing cart
8
3/3/2020
N/A
Testing cart leak
40 - 50 gals
9
caused a release
Attachment A
AFFF Fluid MSDS Sheets
Oakland County International Airport
PFAS Assessment Grant Proposal
Waterford, Michigan
May 26, 2020
ASTI Project No. 11259
i
No, Uhl l N, 1!6
-er Nov, Ih, ZU19 11:WN] o5 -4s
3M General Offices A917
3M Center
St. Paul, Minnesota 561A4-1000
®® C:12l733 11
IQ
Duns No.: 00-617-3082
MATERIAL SAFETY
DATA SHEET AMLM go
DXVISTONe INDUSTRIAL CHEMICAL PRODUCTS DIVISION
TRADE NAME:
FC-203CF-L'IGHT WATER Brand Aqueous Film Forming Foam
3M S.D. NUMBER% 98-0211-5617-3 98-0211.,5618-1 98-0211-5619-9 98-0211-5620-7
9B-0211-5621-5 98-0211-5622-3
ISSUED: FEBRUARY 22, 1991
SUPERSEDES; AUGUST- 1., 1990
DOODMENT% IO -4322-3
Abbreviations! NIL) - Nat Determined N/A - Not Applicable /
ij,1 k 'X -7i
I---- EXPOSURE LIMITS ----
1_ INGREDIENT C.A_s. NO. PERCENT
VALUE UNIT TYPE AUTH
Watr;r 7732-18-5 69.0 - 71.0
NONE NONE NONE NONE
Ethanol,2-(2-butoxy=thoxY)` 112-34-5 20.0
35 ppm TWA CpIRG
Fluoroalkyl Sur'Fao'hents +(5803P, TS 3,0 - 5.0
NONE NONE NONE NONE
5804P)
Synthetic Detergents +(5805P, IS 4,0 - 6.0
NONE NONE NONE NONE
5806P)
1H-Henzotriazol.e,methyl- 29385•-43-1 I'D
NONE NONE NU14E NONE
Triethanolamine 102-71-6 1.0
NONE NONE NONE NONE
SOURCE ON EXPOSURE LX14IT DATA:
- CMRG3 Chemical Manufacture Recommended Guidelines
- NDNE; None Established
NOTE: New Jersey Trades Secrmt Regis•trY (EIN) 04499600-+
m"ee Sactxon 7 for Regulatory Status
THIS PRODUCT CONTAINS THE FOLLOWING TOXIC 0IIEMICAL OR CHEMICALS
SUGJECT TO THE REPORTING
REQUIREMENTS OF SECTION 313 OF TITLE III OF THE SUPERFUND AMENDMENTS AND REAUTHORIZATION
ACT OF 1986 AND 40 CFA PART 37i:
Ethanol,2-(2-butoxyethoxy)-
2. PHYSICAL DATA
BOILING POINT ................ ca. 100,00 C
VAPOR PRESSURE: .......... -- ca. 29.3000 WHO
Calc. a R.T.
VAPOR DENSITY: .............. ca. 0.62 Air = 1
Calc. a R.T.
= 1
EVAPORATXDN RATFr............ < 1.00 Butyl Acetate
SOLUBILITY IN WATER: ........ Miscible
5P. OR&VXTY:.... .,'._....... ._ ea. 1.000 wafer = 1
PERCENT VOLATILE; ......... ca. 90,00
#OLATTLR ORGANICS: ._,.., N/D
PH:................... ca. 7.50-8.50
VIS005TTY: . ._. ...-.. N/D
APPEARANCE AND ODOR; Clear, amber colored liquid.
3. FIRE AND EXPLOSION HAZARD DATA
FLASH POINT;_ .............. .• Nona (5etaflash CC)
FLAMMABLE L11411:5 - LEI,: ..... N/A ,
FLAPIMASLE LIMITS - UEL: -.... N/A
AUTOXONXTIDN TEMPERATURE:
EXTINGUISHING MEDIA:
FC-203CF is a firm extinguishing agent.
GPECIAL FIRE FIGHTING PROCEDURES%
' Full protective clothXng including self-c'on'tained breathing appnvatus,
Abbreviations! NIL) - Nat Determined N/A - Not Applicable /
ij,1 k 'X -7i
Nov. ]h. '2019 11, WM
3M General offices
3M Center
91, Paul, Minnesota 551441000
612/733-1110
Duns No,: 00-617-3082
MATERIAL SAFETY
DATA SHEET
APRIL 18, 1991
CG-75•-CGo6661-YAC0086
OAI(LAHD COUNTY AIRPORT
6500 HIGHLAND
WATERFORD MT 48327
Dear Customer:
IVO, 0411 Y. z/0
o5 -y8
(4916
Enclosed are Material Safety Data Sheets CMSDSs) for products that your
company recently purchased from 3M. Your purchase order numbers era
listed on the last page of this packet for your reference.
Our objective in sending this information is to help you protect the
health and safety of your personnel and to comply with the OSHA Hazard
Communication Standard and Title III of the Super•fund Amendments and
Reauthorization Act of 1986. The OSHA standard requires that all
personnal who may be exposed to hazardous materials must be provided
by their employer with accurate information on the potential hazards of
the materials and trained in proper work practices to minimize any risk.
Please Forward the attached MSDS(s) to the individual in your organ-
ization responsible for implementing these regulations. If your
purchase order designated that •the material be shipped to an address
other than the billing address, both addresses received a copy of the,
MSDS.
If you are a distributor and resell this. product, OSHA and EPA require
that you transmit this MSDS information •to your customers at the time of
first shipment or whenever you receive revised MSDSs 'Prom 3M.
This letter and accompanying MSDS(s) were created using n 311 computer-
ized system which automatically prints and mails an M$n S when a product
is first ordered by a customer or when there hos been a change to 'the
M$DS. 3M is committed to meeting our customer requirements, and asks
that you contact your 3M customer service or sales representative if you
have any questions or problems in this regard.
Sincerely,
F. D. Griffith, Ph.D.
Manager, Toxicology Servicea.
Enclosul•e(5)
SPILL RESPONSE:
observe precautions from other seotiens. Contain spill. Cover with
absorbent material. Collect spilled matariel. Clean up residue with
water. Place in a U.S. DOT approved container and seal.
RECOMMENDED DISPOSAL:
Bleed span't solutions and small product quantities, generally <5 nal.,
to a wastewater treatment system, Reduce discharge rate if foaming
occurs. Incinerate. bulk product an an industrial or commercial
incinerator. Combustion products will include Hp- Disposal
alternative: Dispose of completely absorbed, waste product in a
facility permitted to acoept chemical waBteu. Since regulations vary,
consult, applicable regulotions or authorities before disposal, U.S.
EPA Hazardous Waste No,; None
ENVTRONntCNTAL DATA:
No data available.
SARA HAZARD CLASS;
FIRE HAZARD: No PMSURE: No REACTIVITY: No ACUTE: Yes CHRONIC: Yes
6. SUGGESTED FIRST AID__ -
EYE CONTACT:
Immediately flush with plenty of water. Continue for 10 minutes. Call
a physician.
SKIN CONTACT:
wash affoo-ked area with Soap and water-
- INHALATION:
If symptoms occur, remove person to fresh air. if symptoms continue,
w
Abbreviations, NfD - Not Determined N/A - Not Applicable
No. 0411 P.
3/6
Nov. 15. 2019 11 MAM
oa-4•s
3M General Offices
4918
3M Center
St. Paul, Minnesota 551 441 00 0
612/733.1110
i Duns No.: 00-617-3082
MATERIAL SAFETY
DATA SHEEP
law
MSDS: FC-Z03CF LIGHT WATER Brand Aqueous Film Forming Foam
FEBRUARY ZZ, 1991
PAOFt
2 of 4
3_ FIRE AND EXPLOSION HAZARD DATA (continued)
-
coat, pants, gloves, boats, and bsnds around lags, arms
and waist
should be provided. No skin surface should he exposed.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
Toxic by-products, inoludin5 small amounts of HF, may
be formed, See
Section 6,
NFPA-HAZARD-COOM HEALTH 3 FIRE 0 REACTIVITY 0
UNUSUAL REACTION HAZARDS N
4. REACTIVITY DATA ,
-• STABILITY: Stable
INCOMPATIBILITY - MATERIALS TO AVOID:
Not Applicable
HAZARDOUS POLYNERIZA'PICN: Will Not Occur
HAZARDOUS DECOMPOSITION PRODUCTS:
Thermal decomposition may produce toxic materials including
HF.
Decomposition of usage concentrations does not present
a hazard.
B. ENVIRONMENTAL INFORMATION _
J
SPILL RESPONSE:
observe precautions from other seotiens. Contain spill. Cover with
absorbent material. Collect spilled matariel. Clean up residue with
water. Place in a U.S. DOT approved container and seal.
RECOMMENDED DISPOSAL:
Bleed span't solutions and small product quantities, generally <5 nal.,
to a wastewater treatment system, Reduce discharge rate if foaming
occurs. Incinerate. bulk product an an industrial or commercial
incinerator. Combustion products will include Hp- Disposal
alternative: Dispose of completely absorbed, waste product in a
facility permitted to acoept chemical waBteu. Since regulations vary,
consult, applicable regulotions or authorities before disposal, U.S.
EPA Hazardous Waste No,; None
ENVTRONntCNTAL DATA:
No data available.
SARA HAZARD CLASS;
FIRE HAZARD: No PMSURE: No REACTIVITY: No ACUTE: Yes CHRONIC: Yes
6. SUGGESTED FIRST AID__ -
EYE CONTACT:
Immediately flush with plenty of water. Continue for 10 minutes. Call
a physician.
SKIN CONTACT:
wash affoo-ked area with Soap and water-
- INHALATION:
If symptoms occur, remove person to fresh air. if symptoms continue,
w
Abbreviations, NfD - Not Determined N/A - Not Applicable
Nov, 15. 2019 11,58AM
3M General Offices
3M center
St. Paul, Minnesota 551441000
6121733-1110
Duns No.; 00-617-3082
~ MATERIAL SAFETY
DATA SHEET
MSDS: FC-203CF LIGHT NATtR Drand Aqueous Film Fosming Foam
FEBRUARY 22, 1991
No, 0417 P. 4/6
05-48
4919
PAGE: 3 of 4
6. SUGGESTED FIRST AID (continued)
call a physician,
IF SNALLDN91);
Give two glasses of water. IMMEDIATELY call a physician or Poison
Control Center,
OTHER FIRST AIDi
NONE
7. PRECAUTIONARY INFORMATION
11FOR USE HY QUALIFIED PERSONNEL ONLY" The chemical, hysioal, and
toxioologioell properties of this product have not been fully
investigated and its handling or use may be hazardous. General safe
practice requires that contact with the skin and eyes and breathing of
vapors, fumes, mists, or dusts should be avoided. When not in use, the
container should be kapt 'tightly closed and away from heat flame.
Avoid prolonged/repeated breathing of concentrated vapors. Use only in
areas sufficiently ventilated to prevent vapor buildup.
#X All ingredients are included on TSCA Inventory of Chemical
_.. Substances. -
SPECIAL PROTECTION: �[
EYE PROTECTION, Safety Goggles
SKIN PROTECTION: Rubber gloves, protective clothing.
VENTTLATION: General ventilation is adequate during norma] intended
use of diluted product.
RESPIRATORY PROTECTION: NIOSH approved respirator with organic vapor
cartridge and particulate filter.
8. HEALTH -HAZARD DATA
EYE CONTACT: No data for FC-Z03CF, but similar product causes moderate 'I
irritation of the eyes, Triethanolamine is corrosive to eyes, but not
expected to corrosive at the concentration in this product.
SKIN CONTACT: No data •For EC-Z03CF, but data for a similar product
indicates it may cause irritation Qf skin on prolonged contact; may be
absorbed through the skin in harmful amounts if continuous and
prolonged contact occurs. See above. -
INHALATION: No data for FC•-203CF. Mist or' vapors may cause irritation
of the respiratory system. Very high concentration of vapors may cause
vomiting nausea, diarrhea, abdominal pain, pulmonary edema and
stupor. Undiluted triethanolamine is corrosive. Symptoms of a single
overexposure to the mixture may include unconsciousness, flushing �of
face with dizziness, nausea headache, cough, sore throat, shortness of breath, confusion, convulsions and lethargy; symptoms of repeated
overexposure may include twitching of eyes, recurrent unconsciousness,
end injury of the blood and blood forming system.
INGESTION: No data for FC -205C(^. Not an exrieoted route of industrial -
exposure. Triethanolamine is corrosive when undiluted.
Abbreviations: N/D - Not Determined N/A - N -AL Aon1S..�hle
Nov, 15, 2019 11:5W
3M General Offices
3M Center
$L Paul, Minnesota 55144.1000
012/733-1110
Dula Na,; 00-617-3002
y 11ATERIAL SAFETY
DATA.SHEET
M05_ FC-203CF LSGHT WATER Bxwnd Aqueous Film Forming Foam
FEBRUARY 22, 7991
Abbreviations%- N/D - Not Determined N/A - Not Applicable
No, 0417 P, 5/6
05-48
4920
PAGE: 4 o4 4
ANSULITE AFC-31VIS
3% AFFF
Concentrate
Description
ANSULITE AFC-3MS 3°% AFFF (Aqueous Film -Forming Foam)
Conaontrate combines fluoro- and hydrocarbon-surfoatont
technologies to provide superior fire and vapor suppression for
Claoo S hydrocarbon fool fires, This synthetic foam concentrate
Is intended for firefighting applications at 3% solution in fresh,
salt, or hard water.
ANSULITE AFC-3MS foam solution utilhos three suppmooion
mechanisms for rapid fire knockdown and superior burnbook
resistance: ,
• The foam blanket blocks oxygen supply to the fuel.
■ Liquid drains from the foam blanket and forms an aqueous
film that suppresses fuel vapor and uoals the fuel surface.
• The water content of the roam solution produces a cooling
effect for additional fire suppresolon.
TYPICAL PHYSIOCHEMICAL PROPERTIES AT 77 -F (25 °C)
Appearance Pate yellow liquid
Danelty 1-02 a: 0.02 glml
pH 7,0-3.5
Refractive Index 1,3055 minimum
Viscosity- 3.26 s: 1.0 cSt
Spreading Coefficient 3 dyneu/em minimum at 3% dilution
Pour Point 27 °F 1-$ °C)
Harte Point 27 °F 1-3 °C)
'Cannon-Fonnka vlvoomette At 77 °F (25 'Cl
Application
ANSULITE AFC-3MS a% AFFF Concentrate is Intended for use
on Class B hydrocarbon fuel fires with low water solubility, such
as crude oils, gesolina6, (110401 fuels, and aviation fuels, It Is not
suitable for use on polar fuels with appreciable water solubility,
such as methyl and ethyl alcohol, acetone, and mathyl ethyl
Retain,
The concentrate has excellent wetting properties that non
effectively combat Class A fires as well. It may also be used in
corqunotion with dry chemical agents to provide even greater
fire suppression performance,
ANSULITE AFC-3MS Concentrate can ba Ideal for fixed and
emergenuy response firefighting systems designed To protect
naval and aviation assets. Typical applications include:
• Military and olvilian aircraft facilities
• Crash fire rescue (par US DOT FAA AC No. 150(5210-5D)
• On -board marline/naval fire suppression systema
■ Storage, tanks
• Docks/marine tankers
Approvals, Listings, and Standards
ANSULITE AFC-3MS 3% APPF Concentrate is approved, listed,
qualified under, or meets the requfremenr of the following
specifications and standards:
• US Department of Defense Military Specification
- MIL-F-243S5F: Fire Extinguishing Agent, Aqueous Film -
Forming Foam (AFFF) Liquid Concentrate, for Fresh and So
Warr
. Underwriters Laboratories Inc.
- UL Standard 162, Foam Liquid Concentrates
- Fresh and Sea Water
■ National Fire Protection Asswiation (NFPA)
- NFPA 403, Standard for Alforaff Rescue and Fire -Fighting
Setvlces at Airports
- NFPA 409, Standard on Aircraft Hangars
- NFPA 412, Standard for Evaluating Aircraft Rescue and Fire -
Fighting Foam Piro Rqulpment
- NFPA 414, Standard for Aircraft Rescue slid Flre-Fighting
Vehlales
- NFPA 410, Standard for Heliports
Contact Johnson Controls Tsehhinel Services and/or refer to
listing agency for current produot and compatible hardware
listings.
The enviro
look manufacturad'u
process produces no
C-6 materials do;not
PFOA, Tha jit oroche
concentrate must tht
PFOA
current
One Stanton Street I Marinette, WI 64143.2542• USA 1 +1-716-736.7411 1 NNay.ensul.mm
02017 Johnson Controls. All rights reserved, NI upeci0cetlons no othor Information mown wore
current as of doonmant rovieion dare and are euel44to change without nollro, I Form No. F2016248,07
Ifu( ANSULITE AFC-3MS 3% AFFF
orltdiny short -chain, C-6 fluoro-ahem-
a.telomer-based process: The telomer
i,and these
Okp k09
:down to yield
a used indhe
� .y�
Lr
s,of the U.S.
0 q
Agency 2010/15
in and the
,tom
u)�2017/1000.
Johnson 0)0) 1
Controls
e-1 - r,k,
Foaming Properties
ANSULITE AFC-3MS 3%AFFF Concentrate may be effectively
applied using most conventional foam discharge egptpment at -
3%
b3% dilution with fresh, soft, or hard water, For optimum parlor-
manoe, water hardness should not exceed 500 ppm expressed
as calcium and magnesium.
ANSULITE AFC-3MS Concentrate requires low onergy.to foam
and the foam solution may be applied with aspirating and non -
aspirating discharge devices. Non-nspirnting devicos, such as
handline waterfog/stream nozzles orstandard sprinkler heads,
typically produce expansion ratios from 2:1 to 4:1. Aspirating
Ipw-expansion discharge devices typically produce expansion
ratios from 3.5:1 to 10:1, depending on the type of device and
the flow rale. Medium -expansion discharge devices typically
produce expansion ratios from 20:1 to 8011.
TYPICAL FOAM CHARACTEHISTICSR* (Fresh and Sea Water)
Proportioning Rate
3%
Expdneiort Ratio LE
916
2§% Drain Time (minsec)
3:30
50% Drain Time Iminsee)
5:45
"per EN 1688-3, 2008 protocol
55 gal (208 Li
Proportioning
The recommended operational temporatWo range for ANSULITE
AFC-3MS 3%AFFF Concentrate in 36 "F to 120 °F (2 °C to 49 °C)
per UL -162. This foam concentrate can be correctly proportioned
using most conventional, properly calibrated, inline proportioning
equipment such as:
. Balanced and in-line balanced pressure pump proponloners
■ relawed presavre bladder tanks and ratio flow controllers
■ Around -the -pump type proportionate
rr Fixed or portable in-line vonturi type proportioners
■ l-andline nozzles with fixed aductodptek-up tubas
For Immediate use: The concentrate may also be diluted with
fresh or sea water to a 3% pro -mix solution -
For delayed use; Consult Technical Services for guidance
regarding suitability of a stored pro -mix solution (fresh water
only).
Materials of Construction Compatibility
ANSULITE AFC-31VIS,3 % AFFFConcentrate compatibility with
HDPE has bean auweasfully evaluated using ASTM D1693-
70 protocol under UL -162 standard. Concentrate corrosion
studios with upld-rollad carbon steel (UNS G10100), 00-10
copper -nickel TUNS C70800),70-30 ntekel-copper (UNC N04400),
bronze (UNS COD500), and CHES steel (UNS 5304001 have boon
successfully completed per ASTM P527 protocol under
MIL.F.24365F specification.
To help avoid corrosion, galvanized pipe and fittings should
naver be usod in contact with vacillated ANSULITE AFC-3MS
Concentrate, refer to Johnson Controls Technleal Bulletin
"Acceptable Materiels of Construction" for reoommendations
and guidanoe regarding compatibility of foam concentrate
with common maunlais of construction In the firefighting foam
industry -
Storage and Handling
ANSULITE AFC-3MS 5% AFFF Concentrate should be stored
in the original eupplled package (HDPE tutus, drums, or pails)
or in the recommended foam system equipment as outlined
in Johnson Controls Technical Bulletin "Storage of Foam
Concentrates". The product should be maintained within the
recommended temperature range. If the concentrate freezes
during transport or storage, full product serviceability can be
restored upon thaw with gentle re -mixing.
Paudwa affecting the foam conoanfrate's long-term offbotiveness
include temperature exposure and cycling, storage container
characteristics, air exposure, evaporation, dilution, and contami-
nation, The effective life of ANSU1,I7E AFC-3MS Concantrate, can
be maximized through optimal storage conditions and proper
handling. ANSULITE concerilrates have demonstrated effective
firefighting performance with contents stored in the original
package under proper conditions for more than 10 years,
ANSULITE AFC -?MS Concentrate has been successfully evalu•
ated by the US Naval Sea Systems Command far prolonged
compatibility with other 3% AFFF concentrates quallfled under
MIL -F -24385F spociHcatten-
r Mixing with foam concentrates not vetted by MIL -F -24385F is
, not recommended.
For immediate incident response, It Is appropriate to use
the concentrate in conjunction with comparable 3%AFFF
products.
Inspection
ANSULITE AFC-3MS 3%AFFF Concentrate should be inspected
porfddlolly per NFPA it, EN 13565-2, or other relevant standard.
A roprasantative concentrate sampin should be sent to Johnson
Controls room Analytical Services or ether qualified lobom.
tory for quality analysis per the applicable standard. An annual
Inspeogon and sample analysis Is typically aufflolent unless the
product has been exposed to unusual conditions.
Ordering Information
ANSULITE AFC -$M$ 3%AFFF Concentrate is available In palls,
drumo, totes, pr bulk shipment. Commerclaliy-packaged product
is designated APC31VIS-C, Product requiring DIA, US military
contract packaging is designated AFC-3MS.
Approximate
Part No. Description Shipping Weight
Pall
442708`
5 gal (19 L)
45 Ib (20,4 kg)
Drum
442710"
55 gal (208 Li
49614 12244 kg)
Tote
442711«
265 gal 11,003 L)
2,483 Ib (1,117 kg)
Pail
442707t
5 gal (19 L)
45 Ib (20.4 kg)
Drum
442709Y 55 gal (208 L) 495 ib (224.9 kg)
• AFC-3MS-C Concentrate In cemmarciel packeging (Pails and Drums,
UL -162 compllentl
= APGJMS Concentrate In MIL, RM%F opeollled packoginQpy for dirett
government eanulaltion. naokagln9 roquiromonts for apeon0 Co nfnct
tdenlifcatlon la the reapaAMbility of the cantmot holder,
Note: Tho converted movie values provided are fordimanafonal reference
only and do not reflect an equal maauremenL
ANSUL, ANSULITE, end the product names listed in this material are mark -
and/or rooln"Oodl marks. Unauthorized use is strldly prohibilad-
Sefary Pala arrow (9D8) are availAble at www.anauLcam
®� Nov. 15. 2019 11:59AM No, 0418 P, 1/4
SAFETY DATA SIM D+T
® IDENTITY-13UCKGYE 3 % MTI, SPEC AFFF
e
r
SECTION.J. Chemical Product and Company identification
ProduetName: Buckeye 3% Mil Spec AFFF (BFC-3MS)
Synonym: 3% Mil Spec Concentrate, Mil Spec Aqueous Film Forming Foam
Manufacturer: Buckeye Fire Equipment Company
110 King0oad
Icings Mountain, NC 28086
Telephone: 704.739.7415
Web Address: www.buokevefrre,com
Email Address: bfec@buckeyef-com
Recommended Uso: Fire suppression, not for human or animal drug use,
Emergency: CBEMTRBC 1.800.424.9300
Rovision Date: 05/2015
SECTION II. Ilazard Identification
GHS — Classification
GHS Label Elements;
Hazard Symbols: NONE
Signal Word; WARNING
Hazard Statements:
ID20
Causes eye irritation
Precautionary Statements:
P101
If medical advice is needed, have product container or label at hand,
P102
Keep out of reach of children.
P234
Keep in original container.
P264
Wash hands and Baca thoroughly afterhandling
P301+322
If swallowed, drink2.3 glasses of water.
P302+352
If on skin, wash with soap and water
P3051-351+338
If in ayes, rinse cautiously with water for several minutes. Remove contact lenses if
present and easy to do, and continue to rinse.
11337-1-313
If eye irritation persists, get medical advice/attention.
P401+402+403
Store in original container in a dry, well ventilated place,
SECTION III. Composition/Information on Ingredients
Chemical Name
weight %* CAC i{
Water
> 56 7732-18-5
Hoxylene Glycol
<19 10741-5
Proprietary mixture of fluorosurfactants and <25 NIA
hydrocarbon surfactants
° % is rounded to the nearest appropdntc number. values are not io be considered product spociflcations
Note: Buckeye 3% Mil Spec AFFF does not degrade into nor does it contaiu.PFOS.
SECTTON Iv, First Aid Measures
Eye Ezposvtre- Flush eyes at eye wash station for 15 minutes and repeat until pain-free. If irritation develops or persists or
vision changes occur, seek modical attention.
Skin Exposure- Wash with plenty of soap and water- If irritation develops or persists, seek modicalattention,
Inhalation- Not anticipated to be, a route of exposure. If irritation develops move victim to fresh air and if it persists, seek
medical attention.
uckeye Tire Equipment
Page 1 of
Nov, 15, 2019 11:590 No, 0418 P, 2/4
SAVETY BATA SHEET
IDENTITY- BUCKEYE, 3% MTI. SPEC AI!'I!'F
Ingestion- If victim is conscious and start, give 2-3 glasses of water to drink. Do not leave victim unattended, Seek
immediate medical attention. On the advice of medical personnel, inducevomking,
If vomiting occurs and the victim is conscious, give additional water to further dilute the chemical. Prevent aspiration of
swallowed product by laying victim on side with head lower than theirwaist.
Medical Couddions Possibly Aggravated by Fxposare- Skin contact may aggravate existing ohronio sk reconditions.
SECTION V. Firefighting Measures
Extinguishing Media: N/A. This product is an exthtguisidug agent. It is nonflammable and noncombustible.
Special Firefighting Procedures: N/A
Unasual Fire and Fxplotton Hazards: This produer tray decompose in fine and release oxides of sulfur and nitrogen (Refer
to Section X),
Sensitivity to Mechanical Impact or Static D/scharge. None
SECTION VI. Accidental Release lbleasures
Large spills (1 drum or more) should be addressed by hazardous materials technicians following a site,specific emergency
response plan and trained In the appropriate use of personal protection equipment. Clean up released product using absorbent
socks for containment followed by absorbent material within the containment. If deemed necessary, wear appropriate APR
for amines/glycol ethers (See Section VIII). Bag and drum for disposal. If product is used on a fire and/or contaminatod, use
personal protection equipment and containment appropriate to the name of the mixture. Prevent material from entering
waterways. Handle and dispose of as a hazardous waste wtless testing indicates otherwise. Decontaminate with detergent and
water.
SECTION VII. Handling and Storage
Avoid eye, respiratory, and skin exposure. Use the appropriate personal protective equipment when handling. Wash
thoroughly after handling (Refer to Section VIln. Product should be stored In its original container or extinguisher. Use in
we11-ventilated areas. Do not mix with other extinguishing agents,
SECTION VIII. Rxposure Controls and Personal Protection
Respiratory Protection: During the,use of this product on fines, exhaust gases and products of incomplete combustion are the
main respiratory hazards. In the manufacture of this product, employers and employees must use their collective judgment in
determining the on-the-job settings whore the use of a respirator is prudent, The need for respiratory protection Is notlikely,
for short-term use in well -ventilated areas, Use air -purifying respirators or powerod air -purifying respirators with organic
vapor and amine cartridges for acute short-term exposures. Long term exposures may require the use of positivepressrue
supplied air respirators or self contained breathing apparatus,
Eye Protection: Wear chemical goggles.
Skin Protection: Use nitrile, later:, or similar gloves and coveralls. Good personal hygiene practices are essential. After
handling the product, avoid food, tobacco products, or other means of transferring the product from hand to mouth until after
thoroughly washing.
SECTION IX. Physical and Chemical Properties
Appearance and Odor: pale yellow liquid solution with a mild, sweet odor.
Speclfio Gravity: 1.02
Boiling Point: 97° C
Flash Point: N/A
Tlannnabi7ity: N/A
Solubility. 1000/4
Nov, 15. 2019 11; 59AM
SAFETY DATA SHEET
IDF,NTITX- BUCTaYE 3 % MIT, SPEC AFF
SECTION X Stability and Reactivity
No, 0418 P. 3/4
Stability: Stable
Incompatibles; Strong acids, bases, and oxidizers. Reactive metals. Any material reactive withwator
Decomposition Products: Not known, but oxides of sulfur and nitrogen may be formed.
Hazardous Reactions: None
SECTION XT. Toxicological Iuformation
Routes ofBntry;
Eye Contact; May cause mild transient irritation
Skin Contact: May cause mild transient irritation and/or dermatitis
Inhalation; Inhalation is not aatioipated to be a problem
Ingestion: Irritating to mucous mombraues. Largo oral, doses could produce narcosis
Chronic Toxiaiy: This product's ingredients are not considered as probable or suspected carcinogefis by OSHA, LARC, or
ACGIII.
Reproductive Toxicity.' This product is not known to have any reproductive effects.
SECTION XII. Ecological Information
Ecotcxicityr May cause harm to aquatic life, due to oxygen depletion from the dilution of product after use.
Degradibility. Eiodegradable, in water.
SIGCTION XIII. Disposal Considerations
This product is not a RCRA characteristically hazardous or listed hazardous waste. Dispose of according to state orlmal
laws, which may be more restrictive than federal regulations. Be aware that product used on a fire may be, altered or
contaminated and thereby require different disposal considerations.
SECTION XIV. Transportation Information
This product is not defined as a hazardous material under U.S. Department of Transportation 49 CPR 172, or byTrausport
Canada "Transportation of Dangerous Goode" regulations.
SECTION XV. Regulatory'Information
International Inventory Status: Some ingredients ata on the following inventories
ounu�
Agency
U.S-A.
TSCA
Canada
DSI.
Europe
PINECSIELINCS
Australia
AICS
Japan
MITI
South Korea
IOCL
,Vuropeon Risk and Safety Phrases:
EU Classification- Xl
RPhrases- 36
S Phrases- 26
36
Irritant
Irritating to eyes, respiratory system, and skin.
In case of contact with eyes, rinse immediately with plenty of water and seek
medical advice
Wear suitable protective clothing
Buckeye Fire Eauipinant
Nov. 15. 2019 12;OOPM No. 0418 P. 4/4
SAFETY DATA SHEET
IDENTKrY- BUCIaYE 3% MrL SPEC AFFF
U.S. Federal Regulatory Information:
None of rhe chemicals in this product aro under SARA reporting requirements or have SARA Threshold Planning
Quantities or CERCLA Reportable Quantifies.
State Regulatory Information
Chemicals in this product are covered under the speoifie State rogulationsnoted:
Alaska
Dosignated Toxic and Hazardous Substances- None
California
Permissible Exposure Limits for Chemical Contaminants- None
Florida
Substance list-Nono
Illinois
Toxic Substance List None
Kansas
Section 302/363 List- None
Massachusetts
Substance list- None
Minnesota
List of Hazardous Substances- None
Missouri
Employer Information/Toxic Substance List -None
New Jersey
Rightto Know Hazardous Substance List -None
North Dakota
List of Hazardous Chemicals, Reportable Quantities-Nono
Pennsylvania
HazardobsSubstanceList-None
Rhode Island
Hazardous Substtawo List- None
Texas
Hazardous Substance List- No
West Virginia
11mardousSubstanccList. None
Wisconsin
Toxic and Hazardous Substances- None
California Proposition 65 -No component is listed on the California Proposition 65List
SECTION XVL Other Information
This Safety Data Sheet preparod in uccordance with OSHA's Hazard Cornmunication Standard (29 CFR 1910.1200) and the
Globally Harmonized System of Classification and Labelling of Chemicals (GHS).
HMIS RATINGS:
health I
Flammability 0
Reactivity 0
Personal Protective Equipment: use eye protection, gloves, and appropriate skin protection (Sae Section S)
WHM[S (Canadian Workplace Hazardous Materials Identification)
D2B- May irritate eyes, mucous membranes, or skin
Tho information containod herein is given in good faith as typical values and not as product specifications. No warranty,
either expressed or implied, is hereby made.
Rnrtrano Firo r�'nuin n,avl
% IM I). ZVIY 11:70HIVI
a■
■
s�
2t14 �, 6th Avenue:. '. Y
tits4eld;Texas,U5A7:6063, j .y
f397=4?3,1QSll
07-1
7'I'm
VYwNY.r11Cvhiglidrd,;'td'n r
DESCRIPTION
Chemguard 3% AFFF C301 MS is a specially
formulated, synthetic, aqueous film forming foam
concentrate. A vapor suppressing aquuous film
Is formed by the foam solution draining from the
expanded foam blanket. It Is Intended for use at
a proportioning rate of 3% (3 parts concentrate
to 97 parts water) on Class 13 hydrocarbon type
fuels such as gasoline, kerosene, diesel, etc.
Chemguard 3% AFFF Is not Intended for use on
fuels which are polar solvent/water miscible .
such as alcohols, ketones, esters, etc.
FEATURES
• Chemguard 3% AFFF C-301 MS concen-
trate appears on the QPL (Qualified Pro-
ducts List) for MIL -F -24385F. Subsequently
this product conforms to all performance and
compatibility requirements of U.S. Military
Specifications MIL -F -24385F.
• The:Chemguard,3%.AFFF C-301 MS.ls,)he
on,y.WIL=SPEC apprpv,,ed.;AFFF.ponceotrate
on 4:the ,QPL,.:th4t-Is ,of'the MNeW-Generation"
of,.".Farth Friendly`' foam.concentrates,
• U.L. Listed, Foam Liquid Concentrates
• Suitable for, use with, either fresh or salt
water,
• Excellent wetting characteristics when used
in combating Class A fuel fires
• Suitable for use with both aspirating foam
and standard water fog nozzles
110. 0417 r. I
Synthetic AFFF Foam
3% MS AFFF'
Part No, C-301 MS
If inadvertently frozen, thawing will render
product completely serviceable again.
Suitable for use with carbon steel, fiberglass,
polyethylene or stainless steel. Chemguard
3% AFFF C-301 MS is not compatible with
galvanized pipe or fittings in an undiluted
form.
• Suitable for use with siiiconized dry chemical
extinguishing agents
• U. L, recommended applioatlon rate on
hydrocarbon type fuels is ,10/gpm ft.,
PROPORTIONING
Chemguard 3% AFFF C•301 MS is designed for
use with the following types of proportioning
equipment,
• Fixed or portable in-line eductors
• In-line balanced pressure and pump pres-
sure proportioning skid
• Bladder tank balanced pressure propor-
tioning systems
• Around the pump proportioners
• Handline, air -aspirating nozzles with fixed
eductor pickup tube
DISCHARGE DEVICES
Chemguard 3% AFFF 0-301 MS is suitable for
• Suitable for use'with deluge or closed head use with the following discharge devices,
foam water sprinkler systems
• Foam Chambers
CNEMGUARD INC. 206 S. di`Avenue • Mansfield, Texas, USA 76063 • (817) 473-9964 • FAX (817) 473-0806
He':waWwt
Page II - 10
torLl Pic..
/Z- a
P- 7-
IVOV, I7. LOIN I I;70HIVI
• Air -aspirating and non air -aspirating sprinkler
heads or spray nozzles
• Standard water fog nozzles for handllnes
and monitors
• Air=aspirating foam nozzles
• Foam makers for use with either Floating
Roof storage tanks or Dike/Bund protection
systems
• High back pressure foam makers for sub-
surface base Injection system (hydrocarbon
type fuels only)
APPLICATIONS
Chemguard 3% AFFF C-301 MS will provide
quality protection for a wide range of hazardous
areas such as;
• Crash Fire Rescue
• Storage tanks (non -polar solvent type fuels
only)
• Truck/Rail loading or unloading facilities
Processing/Storage facilities
DockslMarine tankers
• Flammable liquid containment areas
Mobile equipment
PERFORMANCE
To ensure the fire fighting performance require-
ments in today's environment, Chemguard fire
tests their 3% AFFF C-301 MS to the fire
performance requirements of:
U1, 162
UK. Ministry of Defense 42-24
U,S. Military, Specification MIL -F -24385F
HU, V't I) I, L
FOAMING PROPERTIES
Aspirating type discharge devices typically
generate expansion ratios between 6-10 to 1
when 3% MS-AFFF is mixed with water at the
correct ratio, Non -aspirating type devices will
typically generate expansion ratios of between
2-4 to 1. Expansion ratios are dictated by the
type of discharge devices, flow rate and
discharge pressure.
TYPICAL PROPERTIES AT 770F (25°C)
Appearance Clear Slightly Yellow
Specific Gravity 1.079
pH 7.5
Viscosity 4.0
COMPATIBILITY
Chemguard 3% AFFF C-301 MS Is compatible
with any other 3% AFFF manufactured in
accordance with and conforming to all
performance requirements of U.S. Mil -spec MII-
F-24386F or any preceding version of this
specification.
ENVIRONMENTAL IMPACT
Chemguard 3% AFFF C-301 MS is Biode-
gradable, low in toxicity and can be treated in
sewage treatment plants. Please refer to
Chemguard Technical Bulletin regarding foam
products and the environment.
STORAGE
If kept in the original manufacturer's supplied
container and stored within the temperature
range of 35°F - 120°F (2°C - 49°C) a shelf life of
between 20 - 25 years can be expected. When
stored in other than the manufacturers supplied
container, please check with Chemguard for
storage guidelines.
CNEMGUARD INC. 206 S. 61h Avenue . Mansfield, Texas, USA 70063 • (017) 473-9964 • FAX (617) 473.0606
n.e amizom Page II - 11
i
Ivo v, 19. [u I I I191hivi Ivo, U419 r, )
ORDERING INFORMATION
Chemguard 3% AFFF is available in 5 gallon
plastic pails, 55 gallon plastic drums, 330 gallon
plastic bulk drums or can be shipped in bulk,
Part No. 0-301 MSP 5 Gal. Pail (19 L)
Pad No_ C.301 MSD 55 Gel. Drum (208 L)
Part No. C-301 MSSD 330 Gal, bulk Drum (1249 L)
SHIPPING WEIGHT
5 Gal, Pall 44 lbs.
56 Gal. Drum 486 lbs.
330 Gal. Bulk Drum 2970 lbs,
6
I
P
CHEMGUARD INC. 206 S. 6'h Avenue • Mansfield, Texas, USA 76063 P(817)473-0064 • FAX (817) 473.0606
ar.wa xooi Page If • 12
PCL HL error
Subsystem: VECTOR
Warning: I l lega(MediaSize
Resolution #20392 September 23, 2020
Moved by Luebs seconded by Gershenson the resolutions on the amended Consent Agenda be adopted.
AYES: Gingell, Hoffman, Jackson, Kochenderfer, Kowall, Kuhn, Long, Luebs, Markham,
McGillivray, Middleton, Miller, Nelson, Powell, Quarles, Spisz, Taub, Weipert, Woodward, Zack,
Gershenson. (21)
NAYS: None. (0)
A sufficient majority having voted in favor, the resolutions on the amended Consent Agenda were adopted.
41, a-) L"
I HEREBY APPROVE THIS RESOLUTION
CHIEF DEPUTY COUNTY EXECUTIVE
ACTING PURSUANT TO MGL 45.559A (7)
STATE OF MICHIGAN)
COUNTY OF OAKLAND)
I, Lisa Brown, Clerk of the County of Oakland, do hereby certify that the foregoing resolution is a true and
accurate copy of a resolution adopted by the Oakland County Board of Commissioners on September 23,
2020, with the original record thereof now remaining in my office.
In Testimony Whereof, I have hereunto set my hand and affixed the seal of the Circuit Court at Pontiac,
Michigan this 23rd day of September, 2020.
Lisa Brown, Oakland County